When considering installing a new toilet in your Magrath home, there are a few things to contemplate. Firstly it is important that the toilet meets the recommended flushing limit. In the 1960′s, toilets were larger than the ones we use today and used around 32 litres of water every time someone flushed them. Today, low-flow toilets are pretty much standard. These basic, yet effective toilets are focused on conserving water and only use around 7.2 litres of water per flush making them the customary option on the market today.

One of the most obvious benefits of low-flow toilets is the fact that they conserve water. The average person flushes the toilet six times each day. Low-flow toilets use approximately 172 litres less water per day than other toilets. This creates massive water conservation. Using less water is also beneficial to Magrath consumers as it saves money. Due to the fact that low-flow toilets use a smaller amount of water than other toilets, their tanks don’t need to be as large. This makes the toilet smaller, and thus generally more attractive.

The environmental and economical benefits are a big plus; however it must be considered that toilets have been reduced in size and thus struggle to remove as much waste as older toilets.

If the benefits of a low-flow toilet outweigh the drawbacks to the consumer, then they are a perfectly worthwhile purchase. Almost all new toilets are low-flow varieties anyway. The money you spend to purchase the toilet can be regained in a few years by the amount of money you save using less water.

Another option for a suitable toilet is the dual flush design. This refers to the two buttons that are used to operate the toilet. Pressing one button will flush the toilet with about 3 litres of water and is generally referred to as a short flush. Pressing the other button will release about 6 to7 litres of water and is called a long flush.

Despite the use of the words “short” and “long,” the long flush of a dual flush toilet generally uses less than half of the water that is needed in a normal toilet, which by and large uses around 20 litres of water per flush. The dual flush can decrease the amount of water used by up to 60 percent when compared to a traditional flush toilet, and these savings are reflected in the water bill, making them a popular addition in money saving households and businesses.

While a dual flush toilet is more expensive than a traditional flush toilet, the savings gained from reduced water usage make it cost effective over the long term. What’s more, you will be playing your part in saving resources.